Bonded Cargo in Transit: How Goods Move Under Bond Through Southern Africa

clock

November 11, 2026

keyboard

Graham Charlton

folder

Reload Logistics

Bonded Cargo in Transit: How Goods Move Under Bond Through Southern Africa

Bonded Cargo in Transit: How Goods Move Under Bond Through Southern Africa

A container of mining spares lands at Dar es Salaam, bound for a copper mine near Kolwezi in the Democratic Republic of the Congo (DRC). Before it reaches the mine, it crosses Tanzania and Zambia under bond. Duty is owed in the DRC, so each country along the way holds a guarantee against the duty it would lose if the container stayed. That guarantee stays in place until customs see the container leave.

‍

Most problems in a bonded transit start with paperwork at exit borders. A seal number that differs from the documents, or a transit left open on a customs system, can hold a truck at the border and keep the associated guarantee tied up for weeks.

‍

This article follows the container from the port to final clearance; with the checks a shipper can make at each border along the way. A shorter section covers the same journey through Durban.

‍

What Moving Under Bond Means

‍

Cargo moving under bond travels on a transit declaration lodged with customs and a seal fixed to the container. Behind both sits a bond, held by a licensed clearing agent, that covers the duty and tax the transit country would be owed if the goods were sold or used there. Once customs confirm the cargo has left the country, the bond is acquitted and the agent’s liability for that movement closes.

‍

Whether cargo should move in transit at all depends on where the goods will be used or sold. Goods bound for a landlocked market can move under transit clearance through each country on the way, with duty paid at the destination. A container moving under bond is also in a different position from goods held in a bonded warehouse in Zambia, which sit under customs control at one location with their own deadlines.

‍

On this route, the bond belongs to the clearing agent. Your cargo travels on that agent’s guarantee and on the agent’s record with each revenue authority, so appointing an agent decides whose bond your cargo moves under at every border.

‍

Lodging the Bond at Dar es Salaam

‍

At Dar es Salaam, the Tanzania Revenue Authority (TRA) checks the clearing agent's bond account before releasing transit cargo. The bond has to equal the import tax that would have been due if the goods were entering Tanzania. Customs officers supervise loading and fix a seal to the container. The agent then generates a T1 transit document and a movement sheet, and the driver carries them in a sealed envelope to the exit border.

‍

Each agent's bond has a limit, and every transit still open on the system uses part of it. An agent at its limit must wait for earlier transits to be acquitted before it can move more cargo. Mozambique shows how tight this gets: traders there reported that the only agent licensed for transit cargo at Cuchimano held a bond too small to cover the duty on all the traffic through the border.

‍

What to check at the port:

‍

● Bond headroom. Ask the agent to confirm, before the vessel arrives, that its bond account has room for your consignment.

‍

● Numbers on the T1. Check the seal, container, and truck registration numbers on the transit document against the physical load before the truck leaves the port. Exit officers compare them at the border, so a mistake made at loading surfaces there.

‍

Exiting Tanzania at Tunduma

‍

At Tunduma, TRA officers check the seal and the vehicle registration against the documents. If they match, the officer supervising the exit acquits the bond, and the Tanzanian part of the transit is closed.

‍

On the Zambian side at Nakonde, a second transaction begins. Closing the Tanzanian bond and opening a Zambian transit are separate steps, often handled by separate agents, and a truck can sit between the two while the Zambian declaration is prepared. The Zambia Revenue Authority (ZRA) accepts transit declarations before the goods reach the border, so the Zambian entry can be ready when the truck arrives.

‍

At a crossing as busy as Tunduma-Nakonde, a pre-lodged declaration saves time on every truck. Where one agent handles both sides, the Zambian declaration can be lodged while the Tanzanian exit is still being processed.

‍

Crossing Zambia on a Removal in Transit

‍

In Zambia, the cargo moves on a removal in transit (RIT). The agent lodges the declaration on Form CE20 in ZRA's customs system, ASYCUDA World, with the commercial invoice, the bill of lading or waybill, and the manifest. Once customs finalize the declaration, the cargo travels under the agent's bond to the exit border. Containerized cargo is sealed, and ZRA can place higher-risk shipments on electronic tracking for the length of the journey.

‍

The deadlines are short. By road, the cargo must report at the exit port within five days of leaving the customs yard at the entry port. By rail, the window is 30 days. Queues and breakdowns both count toward the five days, and a truck that reaches the exit border late faces penalties on top of the delay. For cargo with flexible delivery dates, rail leaves far more room for problems on the way.

‍

Two more points to settle before the cargo arrives:

‍

● Agent eligibility. ZRA grants the RIT facility only to agents licensed for at least the previous 12 months. Ask about this when you appoint an agent.

‍

● Stops along the way. If the container goes into a bonded warehouse on the way to the border, it moves under different rules with clearance deadlines of their own. Agree on any planned stops with the agent before the declaration is lodged.

‍

Acquittal at Kasumbalesa

‍

At Kasumbalesa, ZRA officers check that the seals fixed at the start of the transit are intact. If everything matches, the transit is acquitted in ASYCUDA World and the truck crosses into the DRC.

‍

Crossing the border and closing the transit are separate events, and the gap between them carries real consequences. When the Auditor General reviewed ZRA's records in 2020, 752 removals in transit had no record of exiting Zambia. ZRA suspended 34 clearing agents and moved to recover the taxes from their bonds.

‍

For a shipper, the practical step is to ask the agent for confirmation that each transit has been acquitted and to keep it on the shipment file. An agent that follows acquittals at every border on the route, as part of its customs clearing work, gives you one point of contact for the whole transit record.

‍

Final Clearance in the DRC

‍

At the DRC border, the container leaves the transit system and enters as an import, with duty assessed by the Direction Générale des Douanes et Accises (DGDA). Every import into the DRC needs a FERI certificate before the goods enter the country, and it has to be presented at the point of entry.

‍

What to plan for:

‍

● FERI timing. Have the certificate issued before the truck reaches Kasumbalesa. A truck that arrives without one waits at the border while it is arranged.

‍

● DGDA clearance time. Allow for it even with the FERI in place. In 2023, a consultant quoted by Freight News questioned how the certificate sped up clearance when DRC customs at Kasumbalesa was taking three days.

‍

● Where clearance happens. Ask the DRC-side agent where final clearance will take place for your cargo, and have the entry lodged before the truck leaves Zambia.

‍

The same steps apply to the supplies bound for Copperbelt mines, where a container held at the border can hold up work at the site.

‍

The Southern Route: Durban, Beitbridge, and Chirundu

‍

A container landing at Durban for the same mine crosses more borders under bond, and South Africa, Zimbabwe, and Zambia each hold their own guarantee.

‍

In South Africa, the South African Revenue Service (SARS) uses an exit scan at the land border as proof that transit goods have left. Goods stopped on a risk basis are released conditionally, and the declarant then has 30 days to upload proof that they left the Southern African Customs Union (SACU).

‍

The truck enters Zimbabwe at Beitbridge. There, transit goods have to be handled by an agent registered and bonded with the Zimbabwe Revenue Authority (ZIMRA), holding a removal in transit bond guaranteed by a bank or insurer. The truck leaves Zimbabwe at Chirundu, where a new RIT runs through Zambia to Kasumbalesa under the same five-day road rule.

‍

That makes three bonds and three acquittals before the DRC border, against two on the Dar es Salaam route. Each one is a point where a transit can stall or stay open on a customs system.

‍

When comparing ports, count the guarantees each route needs alongside distance and port conditions. On the southern route, keep your own record of the South African exit in case SARS asks for proof.

‍

Where Bonded Transits Go Wrong

‍

Most bonded transit problems trace back to a short list of causes, and each has a check that prevents it:

‍

● Seal or document mismatch. A seal number, container number, or truck registration that differs from the transit document holds the truck at the exit border. Check them against the load before the truck leaves the port.

‍

● Late exit. Road transits through Zambia have five days to reach the exit border. Build known queues into the schedule, and use rail where delivery dates allow.

‍

● Descriptions that change along the route. The transit declaration and the final import entry should describe the cargo the same way. Use one set of cargo descriptions for every declaration on the journey.

‍

● Transits left open. A truck can leave a country while its transit stays open on the system. Ask for acquittal confirmation at every exit border.

‍

● No bond headroom. An agent at its bond limit must wait before releasing more cargo. Confirm the agent's capacity before the vessel arrives.

‍

Single Regional Bonds: Where Things Stand

‍

Regional schemes aim to replace separate national bonds with one guarantee for the whole journey. The Common Market for Eastern and Southern Africa (COMESA) runs the longest-established scheme.

‍

The Southern African Development Community (SADC) has its own. SADC trade ministers approved Regional Customs Transit Guarantee regulations in July 2022, and the scheme has been piloted in five member states.

‍

Coverage varies by country and by corridor. Ask your agent which bond applies to your route today before planning around a single guarantee.

‍

Before Your Cargo Ships

‍

Most of the decisions that shape a bonded transit are made before the vessel arrives. Agent choice and route choice set how many bonds the cargo travels on and whose guarantee covers each one. The paperwork prepared in advance decides how long the truck waits at each border.

‍

● Appoint an agent with transit licenses and bond capacity in each country on the route.

‍

● Have the FERI issued before the truck reaches the DRC border.

‍

● Compare routes by the number of bonds they need as well as by distance.

‍

● Arrange for each border declaration to be lodged before the truck arrives.

‍

● Collect acquittal confirmations as the cargo leaves each country.

‍

Once the cargo is on the road, the work shifts to closing each transit. When one agent handles clearance on both sides of each border, the acquittal confirmations come from a single source, and a transit left open on any customs system shows up early.

search

Recent Posts

chevron-right black
One-Stop Border Posts: How Joint Clearance Works in Southern Africa
chevron-right black
Bonded Cargo in Transit: How Goods Move Under Bond Through Southern Africa
chevron-right black
Moving Copper Concentrate: Bulk, Bags, or Containers?
chevron-right black
Rainy Season Logistics: How Weather Disrupts Southern African Corridors
chevron-right black
The Trans-Kalahari Corridor: Botswana's Route to Walvis Bay
chevron-right black
Lebombo Border Post: What’s Holding Up Trucks on the Maputo Corridor?

Categories

chevron-right black
Reload Logistics

You may also like